 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET SILICON TRANSISTOR KN4xxx RESISTOR BUILT-IN TYPE PNP TRANSISTOR FEATURES * Compact package * Resistors built-in type * Complementary to KA4xxx 1.6 0.1 PACKAGE DRAWING (Unit: mm) 0.3 +0.1 -0 0.15 +0.1 -0.05 ORDERING INFORMATION PART NUMBER KN4xxx PACKAGE SC-75 (USM) 0.8 0.1 3 0 to 0.1 2 1 0.2 +0.1 -0 0.5 0.5 1.0 1.6 0.1 0.6 0.75 0.05 ABSOLUTE MAXIMUM RATINGS (TA = 25C) Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current (DC) Collector Current (pulse) Total Power Dissipation Junction Temperature Storage Temperature Note VCBO VCEO VEBO IC IC(pulse) PT Tj Tstg -60 -50 -5 -0.1 -0.2 0.15 150 -55 to +150 V V V A A W C C R1 R2 1 R1 47.0 10.0 22.0 47.0 2.2 2.2 2.2 10.0 47.0 2.2 10.0 47.0 4.7 10.0 R2 22.0 UNIT k k k k k k k k k EQUIVALENT CIRCUIT 3 2 PIN CONNECTION 1: Emitter 2: Base 3: Collector Note PW 10 ms, Duty Cycle 50% PART NUMBER KN4A4M KN4F4M KN4L4M KN4L3M KN4L3N KN4L3Z KN4A3Q KN4A4P KN4F4N MARK A7 B7 C7 D7 E7 F7 G7 H7 X7 R1 10.0 22.0 47.0 4.7 4.7 4.7 1.0 10.0 22.0 10.0 47.0 47.0 R2 10.0 22.0 47.0 4.7 10.0 UNIT k k k k k k k k k PART NUMBER KN4L4L KN4A4Z KN4F4Z KN4L4Z KN4F3M KN4F3P KN4F3R KN4A4L KN4L4K MARK K7 Y7 Z7 N7 P7 Q7 R7 S7 T7 The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D16489EJ3V0DS00 (3rd edition) Date Published October 2004 NS CP(K) Printed in Japan The mark shows major revised points. 2002 KN4xxx ELECTRICAL CHARACTERISTICS (TA = 25C) CHARACTERISTICS Collector Cut-off Current DC Current Gain Collector Saturation Voltage Low-level Input Voltage High-level Input Voltage Input Resistor Emitter to Base Resistor SYMBOL ICBO hFE1 hFE2 VCE(sat) VIL VIH R1 R2 TEST CONDITIONS VCB = -50 V, IE = 0 VCE = -5.0 V, IC = -5.0 mA VCE = -5.0 V, IC = -50 mA IC = -5.0 mA, IB = -0.25 mA VCE = -5.0 V, IC = -100 A VCE = -0.2 V, IC = -5.0 mA Note3 Note2 -0.2 Note1 MIN. TYP. MAX. -100 UNIT nA V V V k k Note 1. PART NUMBER MIN. KN4A4M KN4F4M KN4L4M KN4L3M KN4L3N KN4L3Z KN4A3Q KN4A4P KN4F4N KN4L4L KN4A4Z KN4F4Z KN4L4Z KN4F3M KN4F3P KN4F3R KN4A4L KN4L4K 35 60 85 20 35 135 35 85 85 60 135 135 135 8 35 85 20 35 hFE1 TYP. MAX. 100 195 340 80 100 600 100 340 340 195 600 600 600 50 100 340 80 100 MIN. 80 90 95 80 80 100 80 95 95 90 100 100 100 50 80 95 80 80 hFE2 TYP. UNIT MAX. - Note 2. PART NUMBER MIN. KN4A4M KN4F4M KN4L4M KN4L3M KN4L3N KN4L3Z KN4A3Q KN4A4P KN4F4N KN4L4L KN4A4Z KN4F4Z KN4L4Z KN4F3M KN4F3P KN4F3R KN4A4L KN4L4K VIL TYP. MAX. -0.8 -0.8 -0.8 -0.8 -0.6 -0.5 -0.5 -0.5 -0.6 -0.9 -0.5 -0.5 -0.5 -0.8 -0.5 -0.5 -0.9 -2.0 MIN. -3.0 -4.0 -5.0 -3.0 -3.0 -1.2 -2.0 -3.0 -3.0 -6.0 -2.0 -3.0 -4.0 -3.0 -2.0 -2.0 -6.0 -8.0 VIH TYP. UNIT MAX. V V V V V V V V V V V V V V V V V V 2 Data Sheet D16489EJ3V0DS KN4xxx Note 3. PART NUMBER MIN. KN4A4M KN4F4M KN4L4M KN4L3M KN4L3N KN4L3Z KN4A3Q KN4A4P KN4F4N KN4L4L KN4A4Z KN4F4Z KN4L4Z KN4F3M KN4F3P KN4F3R KN4A4L KN4L4K 7.00 15.40 32.90 3.29 3.29 3.29 0.70 7.00 15.40 32.90 7.00 15.40 32.90 1.54 1.54 1.54 7.00 32.90 R1 TYP. 10.00 22.00 47.00 4.70 4.70 4.70 1.00 10.00 22.00 47.00 10.00 22.00 47.00 2.20 2.20 2.20 10.00 47.00 MAX. 13.00 28.60 61.10 6.11 6.11 6.11 1.30 13.00 28.60 61.10 13.00 28.60 61.10 2.86 2.86 2.86 13.00 61.10 MIN. 7.00 15.40 32.90 3.29 7.00 7.00 32.90 32.90 15.40 R2 TYP. 10.00 22.00 47.00 4.70 10.00 10.00 47.00 47.00 22.00 UNIT MAX. 13.00 28.60 61.10 6.11 13.00 13.00 61.10 61.10 28.60 k k k k k k k k k k k k k k k k k k 1.54 7.00 32.90 3.29 7.00 2.20 10.00 47.00 4.70 10.00 2.86 13.00 61.10 6.11 13.00 TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE PT - Total Power Dissipation - mW 250 200 150 100 50 0 0 50 100 150 200 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 3 KN4xxx [KN4A4M] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE -50 -40 -30 -20 -10 0 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT VCE - Collector to Emitter Voltage - V - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA IB = -430 A -380 -330 -280 -230 -180 -130 -80 VIN = 5.0 V 10.0 V 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 1 -1 - 10 - 100 - 0.01 -1 - 10 TA = 75C 25C -25C - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VCE = -0.2 V IC - Collector Current - A VCE = -5.0 V TA = 75C VIN - Input Voltage - V - 10 - 100 -1 TA = -25C 25C 75C -1 - 10 - 100 25C - 10 -25C - 0.1 -1 - 0.4 - 0.6 - 0.8 -1 - 1.2 - 1.4 - 1.6 - 1.8 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 20 16 R - Resistor - k 12 8 4 0 -25 0 25 50 75 100 TA - Ambient Temperature - C 4 Data Sheet D16489EJ3V0DS KN4xxx [KN4F4M] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 IC - Collector Current - mA IB = -400 A -350 -300 -250 -200 -150 -100 -50 VIN = 5.0 V 10.0 V -40 -30 -20 -10 0 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 1 -1 - 10 - 100 - 0.01 -1 - 10 TA = 75C 25C -25C - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 IC - Collector Current - A VCE = -0.2 V VIN - Input Voltage - V - 10 VCE = -5.0 V TA = 75C - 100 25C - 10 -1 TA = -25C 25C 75C -1 - 10 - 100 -25C - 0.1 -1 - 0.6 - 0.8 -1 - 1.2 - 1.4 - 1.6 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 50 40 R - Resistor - k 30 20 10 -25 0 25 50 75 100 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 5 KN4xxx [KN4L4M] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 IC - Collector Current - mA -40 -30 -20 -10 0 IB = -290 A -240 -190 -140 -90 -40 0 -2 -4 -6 -8 -10 VIN = 5.0 V 10.0 V 15.0 V - 0.2 - 0.1 0 0 - 20 - 40 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0V hFE - DC Current Gain 100 - 0.1 IC = 10 IB TA = 75C 25C -25C TA = 75C 25C -25C 10 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 IC - Collector Current - A VCE = -0.2 V VIN - Input Voltage - V - 10 VCE = -5.0 V TA = 75C - 100 25C -25C - 10 -1 TA = -25C 25C 75C -1 - 10 - 100 - 0.1 -1 - 0.6 - 0.8 -1 - 1.2 - 1.4 - 1.6 - 1.8 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 100 80 R - Resistor - k 60 40 20 0 -25 0 25 50 75 100 TA - Ambient Temperature - C 6 Data Sheet D16489EJ3V0DS KN4xxx [KN4L3M] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 IC - Collector Current - mA IB = -460 A 10.0 V - 0.4 -40 -30 -20 -10 0 -410 -360 -310 -260 -210 -160 VIN = 5.0 V - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 10 TA = 75C 25C -25C - 0.1 IB TA = 75C 25C -25C 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VIN - Input Voltage - V - 10 TA = -25C 25C 75C IC - Collector Current - A VCE = -0.2 V VCE = -5.0 V TA = 75C 25C -25C - 100 -1 - 10 - 0.1 -1 - 10 - 100 -1 - 0.4 - 0.6 - 0.8 -1 - 1.2 - 1.4 - 1.6 - 1.8 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 10 8 R - Resistor - k 6 4 2 0 -25 0 25 50 75 100 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 7 KN4xxx [KN4L3N] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA IB = -430 A -380 -330 -280 -230 -180 -130 -80 10.0 V VIN = 5.0 V -40 -30 -20 -10 0 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 10 TA = 75C 25C -25C - 0.1 IC = 10 IB TA = 75C 25C -25C 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 IC - Collector Current - A VCE = -0.2 V VIN - Input Voltage - V - 10 VCE = -5.0 V - 100 TA = 75C 25C -1 TA = -25C 25C 75C -1 - 10 - 100 - 10 -25C -1 - 0.4 - 0.6 - 0.8 -1 - 1.2 - 0.1 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 20 16 R - Resistor - k 12 8 4 0 -25 0 25 R2 R1 50 75 100 TA - Ambient Temperature - C 8 Data Sheet D16489EJ3V0DS KN4xxx [KN4L3Z] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA IB = -350 A -300 -250 -200 -150 -100 -50 -40 -30 -20 -10 0 VIN = 5.0 V 10.0 V 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V 1000 -1 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 TA = 75C 25C -25C 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VCE = -0.2 V IC - Collector Current - A VCE = -5.0 V - 100 VIN - Input Voltage - V - 10 TA = -25C 25C 75C TA = 75C 25C -1 - 10 -25C -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 0.1 -1 - 10 - 100 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 10 8 R - Resistor - k 6 4 2 0 -25 0 25 50 75 100 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 9 KN4xxx [KN4A3Q] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE -50 IB = -380 A COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT VCE - Collector to Emitter Voltage - V - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA -330 -280 -230 -180 -130 -80 -40 -30 -20 -10 0 VIN = 5.0 V 10.0 V 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 TA = 75C 25C -25C 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 - 10 TA = -25C 25C 75C IC - Collector Current - A VCE = -0.2 V VIN - Input Voltage - V VCE = -5.0 V - 100 TA = 75C - 10 -1 -25C 25C -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 0.1 -1 - 10 - 100 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 12 10 R2 R - Resistor - k 8 6 4 2 0 -25 0 25 50 75 100 R1 TA - Ambient Temperature - C 10 Data Sheet D16489EJ3V0DS KN4xxx [KN4A4P] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 IC - Collector Current - mA IB = -160 A -40 -30 -20 -10 0 -140 -120 VIN = 5.0 V - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 -100 -80 -60 -40 -20 0 -2 -4 -6 -8 -10 10.0 V 15.0 V VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB TA = 75C 25C -25C 10 TA = 75C 25C -25C - 0.1 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VIN - Input Voltage - V - 10 TA = -25C 25C 75C IC - Collector Current - A VCE = -0.2 V VCE = -5.0 V TA = 75C -25C 25C - 100 -1 - 10 - 0.1 -1 - 10 - 100 -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 1.2 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 60 R2 R - Resistor - k 40 20 R1 0 -25 0 25 50 75 100 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 11 KN4xxx [KN4F4N] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 IC - Collector Current - mA IB = -160 A -40 -30 -20 -10 0 -140 -120 VIN = 5.0 V 10.0 V 15.0 V -100 -80 -60 -40 -20 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 TA = 75C 25C -25C 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VCE = -0.2 V IC - Collector Current - A VCE = -5.0 V - 100 VIN - Input Voltage - V - 10 TA = 75C -25C 25C -1 TA = -25C 25C 75C -1 - 10 - 100 - 10 - 0.1 -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 1.2 - 1.4 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 80 70 60 R - Resistor - k 50 40 30 20 10 0 -25 0 R2 R1 25 50 75 100 TA - Ambient Temperature - C 12 Data Sheet D16489EJ3V0DS KN4xxx [KN4L4L] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 IC - Collector Current - mA 10.0 V - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 -40 -30 -20 -10 0 IB = -400 A -350 -300 -250 -200 -150 -100 -50 0 -2 -4 -6 -8 -10 VIN = 5.0 V 15.0 V VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB TA = 75C 25C -25C 10 TA = 75C 25C -25C - 0.1 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VCE = -0.2 V IC - Collector Current - A VCE = -5.0 V TA = 75C -25C 25C VIN - Input Voltage - V - 10 - 100 -1 TA = -25C 25C 75C -1 - 10 - 100 - 10 - 0.1 -1 - 0.9 - 1.1 - 1.3 - 1.5 - 1.7 - 1.9 - 2.1 - 2.3 - 2.5 - 2.7 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 60 R1 R - Resistor - k 40 R2 20 0 -25 0 25 50 75 100 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 13 KN4xxx [KN4A4Z] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA -40 -30 -20 -10 0 IB = -350 A -300 VIN = 5.0 V 10.0 V 15.0 V -250 -200 -150 -100 -50 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain IC = 10 IB 100 TA = 75C 25C -25C - 0.1 TA = 75C 25C -25C 10 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 IC - Collector Current - A VCE = -0.2 V TA = -25C 25C 75C VCE = -5.0 V TA = 75C 25C VIN - Input Voltage - V - 10 - 100 -1 - 10 -25C - 0.1 -1 - 10 - 100 -1 0 - 0.2 - 0.4 - 0.6 - 0.8 -1 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 20 16 R - Resistor - k 12 8 4 0 -25 0 25 50 75 100 TA - Ambient Temperature - C 14 Data Sheet D16489EJ3V0DS KN4xxx [KN4F4Z] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 IC - Collector Current - mA -40 -30 -20 -10 0 IB = -350 A -300 VIN = 5.0 V 10.0 V 15.0 V -250 -200 -150 -100 -50 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain IC = 10 IB 100 TA = 75C 25C -25C - 0.1 TA = 75C 25C -25C 10 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VIN - Input Voltage - V - 10 TA = -25C 25C 75C IC - Collector Current - A VCE = -0.2 V VCE = -5.0 V TA = 75C 25C -25C - 100 -1 - 10 - 0.1 -1 - 10 - 100 -1 0 - 0.2 - 0.4 - 0.6 - 0.8 -1 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 50 40 R - Resistor - k 30 20 10 0 -25 0 25 50 75 100 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 15 KN4xxx [KN4L4Z] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 IC - Collector Current - mA IB = -160 A -40 -30 -20 -10 0 -140 -120 -100 10.0 V VIN = 5.0 V 15.0 V -80 -60 -40 -20 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain IC = 10 IB TA = 75C 25C -25C 100 TA = 75C 25C -25C - 0.1 10 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 IC - Collector Current - A VCE = -0.2 V VIN - Input Voltage - V - 10 VCE = -5.0 V - 100 TA = 75C 25C -25C -1 TA = -25C 25C 75C -1 - 10 - 100 - 10 - 0.1 -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 100 80 R - Resistor - k 60 40 20 0 -25 0 25 50 75 100 TA - Ambient Temperature - C 16 Data Sheet D16489EJ3V0DS KN4xxx [KN4F3M] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA IB = -450 A -350 -40 -30 -20 -10 0 VIN = 5.0 V 10.0 V -250 -150 0 -2 -4 -6 -8 -10 15.0 V VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C -1 - 10 - 100 - 0.1 TA = 75C 25C -25C 1 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VCE = -0.2 V IC - Collector Current - A VCE = -5.0 V TA = 75C 25C VIN - Input Voltage - V - 10 TA = -25C 25C 75C - 100 -1 - 10 -25C - 0.1 -1 - 10 - 100 -1 0 - 0.2 - 0.4 - 0.6 - 0.8 - 1 - 1.2 - 1.4 - 1.6 - 1.8 - 2 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 5 4 R - Resistor - k 3 2 1 0 -40 -20 0 20 40 60 80 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 17 KN4xxx [KN4F3P] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA IB = -300 A -40 -30 -20 -10 0 -250 -200 -150 -100 -50 0 -2 -4 -6 -8 -10 VIN = 5.0 V 10.0 V 15.0 V VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 1 -1 - 10 - 100 - 0.01 -1 - 10 TA = 75C 25C -25C - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VIN - Input Voltage - V - 10 TA = -25C 25C 75C IC - Collector Current - A VCE = -0.2 V VCE = -5.0 V TA = 75C 25C - 100 -1 - 10 -25C -1 0 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 0.1 -1 - 10 - 100 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 14 12 R - Resistor - k 10 8 6 4 2 0 -40 -20 0 20 R2 R1 40 60 80 TA - Ambient Temperature - C 18 Data Sheet D16489EJ3V0DS KN4xxx [KN4F3R] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGEvs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA IB = -300 A -40 -30 -20 -10 0 -250 -200 -150 -100 -50 VIN = 5.0 V 10.0 V 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 TA = 75C 25C -25C 1 -1 - 10 - 100 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 VIN - Input Voltage - V - 10 TA = -25C 25C 75C IC - Collector Current - A VCE = -0.2 V VCE = -5.0 V TA = -25C 25C - 100 -1 - 10 75C -1 0 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 0.1 -1 - 10 - 100 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 5 4 70 60 R2 R1 R1 - Resistor - k 3 2 1 0 -40 -20 0 20 40 60 80 40 30 20 10 0 TA - Ambient Temperature - C R1 - Resistor - k 50 Data Sheet D16489EJ3V0DS 19 KN4xxx [KN4A4L] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 - 20 - 40 - 60 - 80 - 100 IC - Collector Current - mA IB = -350 A -300 VIN = 5.0 V 10.0 V -40 -30 -20 -10 0 -250 -200 -150 -100 -50 0 -2 -4 -6 -8 -10 15.0 V VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 10 TA = 75C 25C -25C -1 - 10 - 100 - 0.1 IB TA = 75C 25C -25C 1 - 0.01 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 IC - Collector Current - A VCE = -0.2 V VIN - Input Voltage - V - 10 VCE = -5.0 V - 100 TA = -25C 75C 25C -1 TA = -25C 25C 75C -1 - 10 - 100 - 10 - 0.1 -1 -1 - 1.2 - 1.4 - 1.6 - 1.8 -2 - 2.2 - 2.4 - 2.6 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 14 12 R1 R - Resistor - k 10 8 6 4 2 0 -40 -20 0 20 40 60 80 R2 TA - Ambient Temperature - C 20 Data Sheet D16489EJ3V0DS KN4xxx [KN4L4K] TYPICAL CHARACTERISTICS (TA = 25C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE VCE - Collector to Emitter Voltage - V -50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0 -5 - 10 - 15 - 20 - 25 - 30 - 35 - 40 IC - Collector Current - mA -40 -30 -20 -10 0 IB = -350 A -300 -250 -200 -150 -100 -50 VIN = 5.0 V 10.0 V 15.0 V 0 -2 -4 -6 -8 -10 VCE - Collector to Emitter Voltage - V IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V -1 VCE = -5.0 V hFE - DC Current Gain 100 IC = 10 IB 10 TA = 75C 25C -25C - 0.1 1 -1 - 10 - 100 - 0.01 -1 - 10 TA = 75C 25C -25C - 100 IC - Collector Current - mA IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 IC - Collector Current - A VCE = -0.2 V VIN - Input Voltage - V - 10 TA = -25C - 100 -1 TA = -25C 25C 75C - 10 25C 75C VCE = -5.0 V - 0.1 -1 - 10 - 100 -1 -2 - 2.4 - 2.8 - 3.2 - 3.6 -4 - 4.4 - 4.8 IC - Collector Current - mA VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 70 60 R - Resistor - k 50 40 30 20 10 0 -40 -20 0 R1 R2 20 40 60 80 TA - Ambient Temperature - C Data Sheet D16489EJ3V0DS 21 KN4xxx * The information in this document is current as of October 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 |
Price & Availability of KN4F3M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |